Engineered from high-impact polycarbonate, this U-bolt provides robust, corrosion-resistant support for 1" piping. Its non-conductive properties make it ideal for sensitive environments, ensuring reliable and safe pipe securing.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 2.06" |
| Inside Length ( B) | 6.71" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this 1" pipe U-bolt features an Inside Width (A) of 2.06" and an Inside Length (B) of 6.71". Constructed from UV-stabilized, high-impact polycarbonate, it offers superior chemical resistance, electrical insulation, and a wide operating temperature range. The 1/2"-13 thread size ensures secure fastening with compatible nuts and washers. Ideal for corrosive atmospheres, marine applications, and where electrical conductivity is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Thread the nuts onto the U-bolt legs, ensuring snug contact with the mounting surface. 3. Tighten the nuts evenly to secure the pipe without over-compression, referring to torque specifications if available.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, leading to potential cracking of the polycarbonate. | Tighten nuts until snug, then an additional quarter to half turn. Avoid excessive force. Use a torque wrench if available and refer to material specifications. |
| Using the U-bolt for applications exceeding its temperature or load ratings. | Verify that the application's environmental conditions and static/dynamic loads are within the polycarbonate U-bolt's specified limits. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Marine and offshore conduit anchoring, Electrical conduit mounting in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||