This 4" polycarbonate U-bolt offers superior corrosion resistance and electrical insulation. Engineered for secure pipe support in demanding environments, it ensures long-term reliability and safety.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.52" |
| Inside Length ( B) | 3.12" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is constructed from high-strength polycarbonate, providing excellent resistance to a wide range of chemicals and environmental factors, making it ideal for marine, chemical processing, and wastewater applications. Its non-conductive properties also prevent galvanic corrosion. With an inside width (A) of 1.52 inches and an inside length (B) of 3.12 inches, it is designed to securely accommodate standard 4-inch nominal pipe. The robust 1/2"-13 UNC thread size ensures a strong and dependable connection with compatible nuts and washers, offering robust structural support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Place the U-bolt around the 4" pipe and position it against the mounting surface. 2. Insert the threaded legs through the mounting holes. 3. Securely fasten with appropriate washers and nuts, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, potentially damaging the polycarbonate. | Tighten nuts until snug and the pipe is held firmly, but avoid excessive force that could deform or crack the U-bolt. |
| Using standard steel nuts and washers without considering galvanic corrosion in specific environments. | Utilize compatible non-metallic or highly corrosion-resistant fasteners to maintain the integrity of the system, especially in aggressive chemical or marine settings. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||