Engineered for demanding industrial environments, this 4" Polycarbonate U-Bolt offers exceptional corrosion resistance and non-conductive properties. Ideal for secure pipe support.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.95" |
| Inside Length ( B) | 6.72" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this Polycarbonate U-Bolt is designed for robust pipe support applications. Measuring 3.95 inches in inside width (A) and 6.72 inches in inside length (B), it accommodates standard 4-inch nominal pipe sizes. The 1/2"-13 UNC thread size ensures secure fastening with compatible hardware. Manufactured from high-performance polycarbonate, it exhibits superior chemical resistance, UV stability, and electrical insulation, making it suitable for corrosive atmospheres and environments where electrical conductivity is a concern. Its lightweight yet strong construction simplifies handling and installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and conduit. 2. Insert the threaded legs through the mounting surface or support. 3. Securely tighten the nuts onto the threaded legs, ensuring even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening which can stress the polycarbonate material. | Tighten nuts to the manufacturer's recommended torque specification or until snug, ensuring even pressure on both sides. |
| Using the wrong thread size or type of hardware. | Always verify the thread size (1/2"-13 UNC) and ensure compatible nuts and washers are used for a secure connection. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||