This 3-inch polycarbonate U-bolt provides exceptional chemical and corrosion resistance. Engineered for demanding environments, it ensures secure and long-lasting pipe support without metal degradation.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.15" |
| Inside Length ( B) | 2.57" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is fabricated from high-performance polycarbonate, offering superior dielectric strength and resistance to a wide range of chemicals, solvents, and UV degradation. Its non-conductive properties make it ideal for applications where electrical isolation is critical. The precise dimensions, including an inside width (A) of 3.15 inches and an inside length (B) of 2.57 inches, ensure a secure fit for standard 3-inch nominal pipes. The 1/2"-13 UNC thread size accommodates common fastening hardware for robust installation. Operating temperature range is -40°F to 250°F (-40°C to 121°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it straddles the supporting structure. 2. Insert the threaded legs through the mounting surface or bracket. 3. Secure firmly using appropriate nuts and washers (not included), tightening evenly on both sides to prevent over-stressing the polycarbonate. 4. Verify pipe stability and ensure no excessive flexing of the U-bolt under load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, leading to stress cracking of the polycarbonate. | Tighten nuts until snug, then apply an additional quarter to half turn. Do not use power tools for final tightening. Use a torque wrench if precise tension is required, respecting polycarbonate's mechanical limits. |
| Using metal hardware that can corrode or conduct electricity, negating the benefits of the polycarbonate U-bolt. | Always use compatible non-metallic or corrosion-resistant fasteners (e.g., stainless steel, nylon) to maintain the integrity of the system and prevent galvanic corrosion or electrical hazards. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Food and beverage production, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||