Engineered for demanding environments, this 3" Polycarbonate U-Bolt offers superior corrosion resistance and non-conductive properties. Its robust design ensures reliable pipe support in chemical processing, water treatment, and marine applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 4.30" |
| Inside Length ( B) | 2.60" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this 3" Polycarbonate U-Bolt is manufactured from a high-strength, UV-stabilized polycarbonate resin, offering exceptional resistance to a wide range of chemicals, salts, and corrosive agents. The inside width (A) measures 4.30 inches, and the inside length (B) is 2.60 inches, providing a secure fit for standard 3-inch nominal pipe sizes. It features a 1/2"-13 UNC thread size, compatible with standard hardware for robust installation. Its dielectric properties make it suitable for applications where electrical conductivity is a concern, preventing galvanic corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Place the U-bolt over the pipe and the mounting surface. 2. Insert the threaded ends of the U-bolt through the mounting holes or bracket. 3. Secure the U-bolt by threading the provided nuts onto the bolt ends, tightening evenly on both sides until snug.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the U-bolt, which can stress the polycarbonate material. | Tighten nuts until snug, ensuring even pressure on both sides. Avoid excessive force; a torque wrench is recommended if precise values are critical for your application. |
| Using the U-bolt with chemicals outside its specified resistance range. | Consult the polycarbonate material's chemical resistance chart and confirm compatibility with the specific media it will encounter before installation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical Processing Piping, Water and Wastewater Treatment, Marine and Offshore Structures, Food and Beverage Industry, Plating and Electroplating Facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||