This robust 3-inch polycarbonate U-bolt offers superior corrosion resistance and electrical insulation. Ideal for demanding environments, it ensures secure and reliable pipe support.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.18" |
| Inside Length ( B) | 2.67" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 3" pipe U-bolt is manufactured from high-performance polycarbonate, offering exceptional chemical inertness, UV resistance, and dielectric strength. With an inside width (A) of 4.18 inches and an inside length (B) of 2.67 inches, it is designed to precisely accommodate standard 3-inch nominal pipe sizes. The 1/2"-13 UNC threaded ends provide robust fastening capabilities for secure installation in corrosive or electrically sensitive applications where metal alternatives are unsuitable. Its lightweight yet strong construction simplifies handling and installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it rests within the pipe supports or clamps. 2. Thread the two nuts onto the U-bolt's threaded ends, tightening them evenly to secure the pipe. 3. Verify that the pipe is held firmly and the U-bolt is properly seated, ensuring no excessive stress on the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts | Tighten nuts until snug, but avoid excessive force that could stress or fracture the polycarbonate material. Use a torque wrench if specific torque values are required for the application. |
| Using in applications exceeding material temperature limits | Consult the polycarbonate material datasheet for its operating temperature range and ensure the application environment remains within these limits to prevent material degradation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Water treatment facilities, Electrical conduit support, Marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||