Engineered from high-strength polycarbonate, this 3-inch pipe U-bolt offers superior corrosion resistance and electrical insulation. Ideal for challenging environments where metal fasteners degrade.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.39" |
| Inside Length ( B) | 5.04" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt is constructed from robust polycarbonate, offering exceptional chemical resistance, UV stability, and dielectric properties. The internal dimensions are carefully controlled with an Inside Width (A) of 4.39 inches and an Inside Length (B) of 5.04 inches, ensuring a precise fit for 3-inch nominal pipe. It features a standard 1/2"-13 thread size, compatible with common hardware. This material choice mitigates galvanic corrosion and simplifies installations in electrically sensitive areas, making it a superior alternative to traditional metal fasteners in many corrosive or conductive settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate U-bolt size and material for the application. 2. Position U-bolt around the pipe, ensuring clearance. 3. Thread nuts onto the U-bolt legs until snug, then tighten evenly to secure the pipe without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening polycarbonate U-bolts, potentially causing stress fractures or deformation. | Tighten nuts evenly and to the manufacturer's recommended torque, typically lower than for metal U-bolts, to avoid damage. |
| Using polycarbonate U-bolts in applications exceeding their temperature or load ratings. | Verify the product's specifications against the environmental and structural demands of the installation to ensure suitability. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Marine and offshore installations, Electrical conduit and cable tray securing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||