Engineered from high-strength polycarbonate, this 3" pipe U-bolt offers exceptional corrosion resistance for demanding environments. Its robust design ensures secure fastening and long-term performance where traditional metals fail.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.02" |
| Inside Length ( B) | 5.26" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 3" pipe U-bolt features an inside width (A) of 4.02 inches and an inside length (B) of 5.26 inches, accommodating standard 3-inch nominal pipe. The 1/2"-13 UNC thread size ensures compatibility with common hardware. Manufactured from premium polycarbonate, it exhibits superior resistance to a broad spectrum of chemicals, salts, and environmental factors, making it ideal for marine, chemical processing, and outdoor applications where galvanic corrosion and material degradation are concerns. The material's inherent dielectric properties also prevent electrical conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it straddles the supporting structure. 2. Insert the threaded legs of the U-bolt through the mounting holes in the supporting structure. 3. Securely fasten the U-bolt using appropriate nuts and washers (not included), tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress and potentially crack the polycarbonate material. | Tighten nuts until snug and the pipe is securely held. Avoid excessive force and periodically check for any signs of material distress. |
| Using in applications exceeding the material's temperature or load-bearing limits. | Consult the polycarbonate material specifications for temperature ranges and load capacities relevant to the intended application before installation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Marine and offshore piping support, Chemical processing plants, Wastewater treatment facilities, Electrical conduit support in corrosive areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||