Engineered for superior performance, this 3" Polycarbonate U-Bolt offers exceptional corrosion resistance and dielectric strength. Ideal for aggressive chemical environments and applications requiring electrical isolation.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 2.22" |
| Inside Length ( B) | 7.78" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 3" Polycarbonate U-Bolt features an Inside Width (A) of 2.22 inches and an Inside Length (B) of 7.78 inches, accommodating standard 3-inch nominal pipe sizes. It is manufactured from high-impact, UV-stabilized polycarbonate, offering excellent chemical resistance to a broad spectrum of acids, bases, and solvents, and a dielectric strength that prevents electrical conductivity. The 1/2"-13 UNC thread size ensures compatibility with standard hardware. This material's non-magnetic properties make it suitable for sensitive instrumentation and marine applications where ferrous corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring a snug fit. 2. Insert the threaded legs of the U-bolt through the mounting surface or clamp. 3. Securely fasten using appropriate washers and nuts, tightening evenly on both sides to the specified torque. 4. Verify that the pipe is properly supported and the U-bolt is not over-tightened, which could deform the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, leading to deformation or cracking of the polycarbonate. | Use a torque wrench to tighten nuts to the manufacturer's recommended specification for polycarbonate fasteners, typically lower than for metal. |
| Using the U-bolt in applications exceeding its chemical resistance or temperature limits. | Consult the polycarbonate material's chemical compatibility charts and temperature ratings to ensure suitability for the specific operating environment. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Electrical conduit and cable support, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||