This high-performance Polycarbonate U-Bolt is engineered for secure and reliable support of 2" nominal pipe. Its exceptional chemical resistance and non-conductive properties make it a superior choice for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.44" |
| Inside Length ( B) | 7.18" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this 2" Polycarbonate U-Bolt is designed for robust pipe support in corrosive or electrically sensitive environments. Constructed from advanced polycarbonate, it offers superior chemical resistance to a wide range of acids, bases, and solvents, along with excellent dielectric strength. The U-bolt features an inside width (A) of 4.44 inches and an inside length (B) of 7.18 inches, accommodating 2" nominal pipe sizes. The threaded legs are manufactured to a 1/2"-13 UNC standard, ensuring compatibility with standard nuts and washers for secure fastening. Its lightweight yet strong design simplifies installation and handling while providing long-term structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring the pipe rests evenly within the curve. 2. Insert the threaded legs through the mounting surface or bracket. 3. Secure the U-bolt by threading nuts onto each leg, tightening them evenly until snug. Avoid over-tightening to prevent damage to the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, leading to stress cracking of the polycarbonate. | Tighten nuts gradually and evenly until the U-bolt is secure, but do not force them. Use a torque wrench set to the manufacturer's recommended specification if available. |
| Using the U-bolt in applications exceeding its temperature or chemical resistance limits. | Verify the operating temperature and chemical environment against the polycarbonate material's specifications before installation. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Water treatment facilities, Marine environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||