This high-performance Polycarbonate U-Bolt is engineered for secure fastening of 2" diameter pipes. Its robust construction ensures excellent chemical resistance and non-conductive properties for critical infrastructure.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.97" |
| Inside Length ( B) | 2.86" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 2" pipe U-bolt features a nominal pipe size of 2 inches, with precise inside dimensions of 1.97" (A) width and 2.86" (B) length. Constructed from high-grade polycarbonate, it offers exceptional resistance to a broad spectrum of chemicals, UV degradation, and extreme temperatures (-40°F to 250°F). The 1/2"-13 UNC thread size ensures compatibility with standard hardware. Its inherent dielectric strength makes it ideal for applications where electrical conductivity must be avoided, such as in corrosive environments or near sensitive equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests snugly against the mounting surface. 2. Thread the nuts onto the bolt ends until hand-tight. 3. Using appropriate wrenches, tighten the nuts evenly to secure the pipe, avoiding over-tightening to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can crack or deform the polycarbonate. | Tighten nuts evenly and incrementally, stopping when the pipe is securely held and no excessive stress is visible on the U-bolt. |
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and the U-bolt's inside dimensions to ensure a proper fit. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Water and wastewater treatment facilities, Food and beverage industries, Marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||