Engineered for demanding industrial environments, this 2" polycarbonate U-bolt offers superior corrosion resistance and electrical insulation. Its robust construction ensures secure pipe support where traditional metal fasteners fail.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 2.61" |
| Inside Length ( B) | 5.64" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this polycarbonate U-bolt is designed for secure and reliable pipe support in challenging environments. With an inside width of 2.61 inches (A) and an inside length of 5.64 inches (B), it accommodates standard 2-inch nominal pipe sizes. The robust polycarbonate material provides exceptional resistance to a wide range of chemicals, UV radiation, and extreme temperatures, making it ideal for applications where corrosion or electrolysis is a concern. The 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers for a secure installation. Its non-conductive properties also make it suitable for electrical isolation requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Insert the threaded legs through the designated mounting holes or bracket. 3. Securely fasten with appropriate nuts and washers, tightening evenly on both sides to achieve firm contact without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, which can deform the polycarbonate and compromise its structural integrity. | Tighten nuts until snug and the U-bolt is firmly seated, but avoid excessive force. Use a torque wrench if precise values are critical for the application. |
| Using metal washers directly against the polycarbonate without consideration for potential stress concentration. | Utilize wider, flat washers to distribute the load evenly across the polycarbonate surface. Consider using polymeric washers if extreme load distribution is required. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore environments, Food and beverage production, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||