Engineered for superior pipe support, this 2" polycarbonate U-bolt offers exceptional durability and corrosion resistance. Its robust construction ensures reliable, long-lasting performance in demanding environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.60" |
| Inside Length ( B) | 5.39" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt boasts an Inside Width (A) of 1.60 inches and an Inside Length (B) of 5.39 inches, perfectly accommodating 2-inch nominal pipe sizes. Constructed from high-impact, UV-stabilized polycarbonate, it exhibits excellent chemical resistance and a wide operating temperature range. The 1/2"-13 UNC thread size ensures secure fastening with standard nuts and washers. Its non-conductive properties make it ideal for applications where electrical isolation is paramount. This design minimizes stress points and provides uniform load distribution, preventing pipe damage and ensuring system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is centered. 2. Place the supplied washers and nuts onto the threaded ends of the U-bolt. 3. Tighten the nuts evenly on both sides to achieve firm, but not overtightened, contact with the pipe and mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts | Tighten until snug, ensuring the polycarbonate conforms slightly without deforming excessively. |
| Using in extreme temperatures outside polycarbonate's rating | Verify the ambient and fluid temperatures are within the specified operating range for polycarbonate. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Marine and offshore installations, Electrical conduit securing, Plumbing and HVAC systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||