Engineered for robust pipe support in corrosive or electrically sensitive areas. This 2" polycarbonate U-bolt offers superior chemical resistance and non-conductive properties, ensuring safe and reliable installation.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 1.04" |
| Inside Length ( B) | 6.19" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this U-bolt is constructed from high-strength polycarbonate, offering exceptional resistance to a wide range of chemicals, solvents, and UV degradation. Its precise dimensions, with an inside width (A) of 1.04 inches and an inside length (B) of 6.19 inches, ensure a snug and secure fit for 2-inch nominal pipe. The 1/2"-13 UNC thread size provides ample strength for secure fastening. Ideal for applications where metallic corrosion or electrical conductivity is a concern, such as chemical processing plants, wastewater treatment facilities, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered and aligned with the mounting surface. 2. Insert the threaded ends of the U-bolt through the mounting holes or bracket. 3. Secure the U-bolt by tightening the nuts onto the threaded ends, ensuring even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the polycarbonate. | Tighten nuts to snug, then an additional 1/4 to 1/2 turn. Do not overtighten. Use a torque wrench if specific torque values are required for the application. |
| Using excessive force during installation, potentially cracking the material. | Apply steady, even pressure during tightening. If resistance is met, re-check alignment and ensure the U-bolt is correctly sized for the pipe. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical Processing Piping, Wastewater Treatment Systems, Marine and Offshore Installations, Electrical Conduit Support, Food and Beverage Processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||