Engineered for demanding environments, this 2" pipe U-bolt is constructed from high-strength polycarbonate, offering superior corrosion and UV resistance for long-term reliability.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.66" |
| Inside Length ( B) | 7.07" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 2" pipe U-bolt features a robust polycarbonate construction, offering exceptional resistance to chemicals, corrosion, and UV degradation. With an inside width (A) of 1.66 inches and an inside length (B) of 7.07 inches, it is designed to securely fasten 2-inch nominal diameter pipes. The 1/2"-13 UNC thread size ensures compatibility with standard hardware. Its lightweight yet durable nature makes it suitable for a wide range of industrial and marine applications where metal alternatives may fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and through the mounting surface. 2. Thread the nuts onto the bolt ends, ensuring even tightening on both sides. 3. Tighten nuts to the specified torque, ensuring a secure but not over-compressed fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts | Tighten nuts until snug, then apply an additional quarter to half turn. Avoid excessive force that could deform the polycarbonate. |
| Using incorrect hardware | Ensure all accompanying nuts and washers are compatible with the 1/2"-13 thread size and are made from materials resistant to the operating environment. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Marine piping systems, Chemical processing plants, Wastewater treatment facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||