This high-performance 2" Polycarbonate U-Bolt offers superior corrosion resistance and electrical insulation. Engineered for secure pipe support in demanding environments, ensuring long-term structural integrity.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 2.08" |
| Inside Length ( B) | 2.79" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this polycarbonate U-bolt is engineered for robust pipe securing applications where traditional metal fasteners are susceptible to corrosion or electrical conductivity concerns. It features an inside width (A) of 2.08 inches and an inside length (B) of 2.79 inches, accommodating standard 2-inch nominal pipe. The robust 1/2"-13 UNC thread size ensures secure fastening with compatible nuts and washers. Polycarbonate's inherent non-conductive properties make it ideal for installations involving dissimilar metals or where electrical isolation is critical. Its excellent impact strength and resistance to a wide range of chemicals further enhance its suitability for diverse industrial and chemical processing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate nuts and washers compatible with the 1/2"-13 thread size. 2. Position the U-bolt around the 2" pipe and through the mounting surface or bracket. 3. Hand-tighten nuts initially, then progressively tighten using calibrated torque wrenches to the specified torque for polycarbonate fasteners, ensuring even pressure distribution. 4. Verify secure fit and alignment before placing the system into operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening U-bolt nuts, which can cause deformation or cracking of the polycarbonate. | Utilize calibrated torque wrenches and adhere to manufacturer-recommended torque specifications for polycarbonate fasteners. Ensure even tightening on both sides. |
| Using metal washers that can lead to galvanic corrosion if in contact with other metal components. | Employ compatible non-conductive washers or ensure proper insulation between the polycarbonate U-bolt and any metallic components to prevent galvanic corrosion. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Wastewater treatment infrastructure, Marine and offshore installations, Electrical conduit securing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||