This robust polycarbonate U-bolt securely fastens 2" pipes, offering exceptional corrosion resistance and electrical insulation. Engineered for demanding industrial environments, it ensures reliable support and longevity.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.80" |
| Inside Length ( B) | 7.05" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this polycarbonate U-bolt is designed for secure and durable pipe support. Featuring an inside width (A) of 3.80 inches and an inside length (B) of 7.05 inches, it is perfectly suited for 2-inch nominal pipe sizes. The 1/2"-13 UNC thread size ensures compatibility with standard fastening hardware. Constructed from high-strength, UV-stabilized polycarbonate, this U-bolt offers superior resistance to a broad spectrum of chemicals, acids, and alkalis, making it ideal for corrosive atmospheres. Its non-conductive properties also provide excellent electrical insulation, crucial for applications where conductivity is a concern. The material's inherent toughness and impact resistance ensure sustained performance under significant mechanical loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Place the U-bolt around the pipe, ensuring the pipe is seated within the U-bolt's curve. 2. Position the supplied mounting plate or backing if applicable, aligning bolt holes. 3. Insert and hand-tighten the nuts onto the threaded ends of the U-bolt, ensuring even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, which can lead to cracking or deformation of the polycarbonate. | Tighten nuts gradually and evenly until snug, then apply a final quarter-turn. Use a torque wrench set to the manufacturer's recommended torque for polycarbonate fasteners. |
| Using the wrong size U-bolt for the pipe diameter, resulting in an insecure or damaging fit. | Always verify the 'pipe size' the U-bolt is designed for (in this case, 2" nominal pipe) against the actual pipe being secured. Check the inside dimensions (A and B) against the pipe's outer diameter and required clearance. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||