Engineered for robust pipe support, this 2" polycarbonate U-bolt offers superior corrosion resistance and electrical insulation. Its high-strength polymer construction ensures longevity in demanding industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.47" |
| Inside Length ( B) | 4.03" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 2" polycarbonate U-bolt is designed for secure and reliable pipe fastening. It features an inside width (A) of 4.47 inches and an inside length (B) of 4.03 inches, accommodating standard 2-inch nominal pipes. The U-bolt is threaded with a 1/2"-13 UNC standard, ensuring compatibility with common hardware. Constructed from high-impact, UV-stabilized polycarbonate, it provides excellent resistance to chemicals, moisture, and extreme temperatures, making it ideal for corrosive environments and applications where electrical conductivity is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe and the supporting structure. 2. Insert the threaded ends through the mounting holes of the accompanying bracket or plate. 3. Secure the U-bolt by tightening the nuts onto the threaded ends, ensuring even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress the polycarbonate material. | Tighten nuts until snug, ensuring secure but not excessive clamping force. Use torque wrenches if precise specification is required. |
| Using for applications exceeding the material's temperature or chemical resistance limits. | Verify the operating environment's temperature and chemical composition against polycarbonate's known properties before installation. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Water and wastewater treatment systems, Electrical conduit mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||