This 2" polycarbonate U-bolt provides robust, non-corrosive support for piping systems. Its advanced polymer construction ensures excellent chemical resistance and electrical insulation for demanding environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.28" |
| Inside Length ( B) | 2.44" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is constructed from high-strength, UV-stabilized polycarbonate, offering superior resistance to a wide range of chemicals, solvents, and environmental degradation. The material's inherent dielectric properties make it ideal for applications where electrical conductivity is a concern. With an inside width (A) of 1.28 inches and an inside length (B) of 2.44 inches, it is precisely designed to accommodate standard 2-inch nominal pipe sizes. The 1/2"-13 UNC thread size on the integrated studs ensures secure fastening with compatible nuts and washers. This U-bolt is built to withstand moderate loads in corrosive atmospheres, offering a durable and long-lasting alternative to metal fasteners.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring the pipe rests evenly within the curved section. 2. Thread the nuts onto the U-bolt studs, hand-tightening initially. 3. Use appropriate wrenches to tighten the nuts securely, ensuring even pressure on both sides to prevent pipe deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts | Tighten nuts until snug and the pipe is firmly supported, but avoid excessive force that could stress or deform the polycarbonate. |
| Using in extreme high-temperature applications | Verify the operating temperature range of polycarbonate is suitable for the application; consult material datasheets for specific limits. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||