This high-performance polycarbonate U-bolt is engineered for secure and non-corrosive pipe support. Designed for 2" nominal pipe size, its robust material offers excellent resistance to chemicals and UV exposure.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.11" |
| Inside Length ( B) | 3.15" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this U-bolt is constructed from high-impact polycarbonate, offering superior corrosion resistance and dielectric strength compared to traditional metal fasteners. Its precise dimensions include an Inside Width (A) of 1.11 inches and an Inside Length (B) of 3.15 inches, perfectly accommodating standard 2" nominal pipe. The 1/2"-13 UNC thread size ensures compatibility with standard hardware for secure installation. Ideal for applications where chemical exposure, electrolysis, or weight is a concern, such as plumbing, marine, and chemical processing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it sits within the designated groove. 2. Insert the threaded ends of the U-bolt through the mounting surface or bracket. 3. Secure the U-bolt by tightening the 1/2"-13 nuts evenly on both sides, ensuring a snug fit without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can stress or crack the polycarbonate material. | Tighten nuts until snug. If resistance is felt, stop and check alignment. Use a torque wrench set to the manufacturer's recommended torque for polycarbonate fasteners if available. |
| Using metal washers directly against the polycarbonate, which can cause abrasion or stress concentration. | Utilize plastic or nylon washers between the nut and the polycarbonate surface to distribute load and prevent damage. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Marine and offshore installations, Plumbing and HVAC systems, Electrical conduit mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||