Engineered from robust polycarbonate, this U-bolt provides superior corrosion resistance and high dielectric strength. Ideal for securing 1" pipes in harsh industrial and marine environments where metal fasteners degrade.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 2.69" |
| Inside Length ( B) | 3.10" |
| Thread Size | 1/2"-13 |
Purpose-built for heavy-duty applications, this polycarbonate U-bolt is designed to reliably secure 1" nominal pipe size (NPS) piping. It offers an Inside Width (A) of 2.69 inches and an Inside Length (B) of 3.10 inches, accommodating standard 1" pipe dimensions. The integrated threaded rods feature a 1/2"-13 UNC thread size, allowing for secure fastening with compatible nuts and washers (sold separately). The advanced polycarbonate material exhibits exceptional resistance to a broad spectrum of chemicals, UV radiation, and saltwater, ensuring longevity and structural integrity in corrosive atmospheres. Its non-conductive properties also make it suitable for applications where electrical insulation is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe, ensuring it is centered. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate 1/2"-13 nuts and washers (not included), tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized nuts or washers. | Always use 1/2"-13 nuts and washers that fully encompass the threaded legs for optimal load distribution. |
| Over-tightening the nuts, potentially damaging the polycarbonate. | Tighten nuts firmly but avoid excessive force. Torque specifications should be determined based on the specific application and load requirements, but generally, moderate tightness is sufficient for polycarbonate. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Marine pipe and conduit support, Chemical processing plant piping, Wastewater treatment facilities, Electrical conduit securing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||