Engineered for demanding environments, this 1" Polycarbonate U-Bolt offers superior corrosion resistance and electrical insulation. Its robust design ensures secure pipe support in corrosive or electrically sensitive applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.58" |
| Inside Length ( B) | 4.17" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is manufactured from high-strength, impact-resistant polycarbonate. It features an inside width (A) of 3.58 inches and an inside length (B) of 4.17 inches, accommodating standard 1-inch piping. The 1/2"-13 UNC thread size ensures compatibility with standard hardware for secure fastening. Polycarbonate's inherent non-corrosive properties make it ideal for use in saline, acidic, or alkaline environments where metal fasteners would degrade. Its excellent dielectric strength also makes it suitable for applications requiring electrical isolation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe, ensuring it is seated correctly. 2. Place the provided washers and nuts onto the threaded legs of the U-bolt. 3. Tighten the nuts evenly on both sides to secure the pipe against the mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress the polycarbonate material. | Tighten nuts until snug, applying even pressure. Avoid excessive force that could deform the U-bolt. |
| Using incorrect thread size hardware, leading to a loose or unsafe connection. | Confirm that the 1/2"-13 thread size matches the nuts and any associated brackets or mounting plates. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||