This 1" polycarbonate U-bolt offers superior corrosion resistance and non-conductive properties. Engineered for secure pipe support in demanding environments, ensuring long-term integrity.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 2.83" |
| Inside Length ( B) | 4.53" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is constructed from high-performance polycarbonate, offering exceptional chemical and UV resistance. With an inside width (A) of 2.83 inches and an inside length (B) of 4.53 inches, it is designed to securely accommodate standard 1-inch piping. The robust 1/2"-13 UNC threads provide reliable fastening for the included nuts. Its non-metallic composition makes it an ideal choice for applications where galvanic corrosion or electrical conductivity is a concern, such as in water treatment facilities, chemical processing plants, and marine installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered and properly seated. 2. Place the provided washers and nuts onto the threaded legs of the U-bolt. 3. Tighten the nuts evenly and securely using appropriate wrenches until the pipe is held firmly in place without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress or crack the polycarbonate. | Tighten nuts until snug and the pipe is secure, but avoid excessive force. Refer to torque specifications if available for similar applications. |
| Using the U-bolt for applications exceeding its load or temperature ratings. | Verify the product's specifications against the environmental and load requirements of the installation. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing plant piping, Water and wastewater treatment systems, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||