Engineered for demanding environments, this 1" polycarbonate U-bolt offers superior corrosion resistance and non-conductive properties. Its robust design ensures secure pipe support in a variety of industrial and commercial settings.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.38" |
| Inside Length ( B) | 2.25" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 1" pipe U-bolt is manufactured from high-impact polycarbonate, offering exceptional chemical resistance and a dielectric strength that eliminates grounding concerns. With an Inside Width (A) of 4.38 inches and an Inside Length (B) of 2.25 inches, it is designed for a secure fit on standard 1-inch nominal pipe sizes. The integrated 1/2"-13 UNC thread provides robust fastening capabilities, ensuring reliable structural support for piping systems in corrosive or electrically sensitive environments. Its lightweight yet durable construction simplifies installation and reduces system load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe and the mounting surface. 2. Insert the threaded legs through the corresponding mounting holes. 3. Securely tighten the nuts onto the threaded legs using appropriate wrenches, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, potentially deforming the polycarbonate. | Tighten nuts until snug and secure, avoiding excessive force. Use a torque wrench if precise specifications are required and available for polycarbonate. |
| Selecting an incorrect U-bolt size for the pipe diameter. | Always verify the 'Inside Width' and 'Inside Length' specifications against the actual pipe OD and required clearance for the intended application. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Electrical conduit support, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||