Engineered for demanding industrial environments, this 1" polycarbonate U-bolt offers exceptional chemical resistance and non-conductive properties. Its robust design ensures secure mounting of pipes.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.45" |
| Inside Length ( B) | 4.43" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this 1" pipe U-bolt is precision-molded from high-performance polycarbonate. Engineered with an inside width (A) of 4.45 inches and an inside length (B) of 4.43 inches, it provides a secure fit for standard 1-inch nominal pipes. The robust 1/2"-13 thread size ensures ample clamping force and compatibility with common hardware. Polycarbonate's inherent resistance to a broad spectrum of chemicals, UV radiation, and impact makes this U-bolt ideal for applications in corrosive atmospheres, water treatment facilities, and areas requiring non-sparking or electrically insulating fastening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Insert the threaded legs through the corresponding holes in the mounting bracket or plate. 3. Secure using appropriate washers and nuts, tightening evenly on both sides to achieve desired clamping force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening with excessive force | Apply torque gradually and evenly to both nuts to avoid stressing the polycarbonate material. |
| Using in applications exceeding temperature limits | Verify that the operating temperature of the application remains within the specified limits for polycarbonate. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Plumbing and piping in chemical processing plants, Mounting of conduit and electrical raceways in corrosive areas, Support for fluid transfer lines in food and beverage industries.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||