This 1" pipe U-bolt, crafted from robust polycarbonate, offers superior corrosion resistance and dielectric strength. Engineered for secure mounting in demanding environments, ensuring long-term performance and reliability.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.28" |
| Inside Length ( B) | 5.26" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this Polycarbonate U-Bolt is designed for 1" nominal pipe size, featuring an inside width (A) of 1.28 inches and an inside length (B) of 5.26 inches. Manufactured from high-strength polycarbonate, it provides excellent resistance to a wide range of chemicals, UV radiation, and extreme temperatures, making it an ideal choice for corrosive or electrically sensitive applications where traditional metal fasteners would degrade or pose a safety hazard.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe and the mounting surface. 2. Insert the threaded legs through the designated mounting holes. 3. Secure the U-bolt using appropriate washers and nuts, tightening evenly to the specified torque without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress and potentially crack the polycarbonate material. | Tighten nuts gradually and evenly. Refer to manufacturer's torque specifications for polycarbonate fasteners or use a torque wrench set to a conservative value. |
| Using the U-bolt for applications exceeding its chemical or temperature resistance limits. | Verify the chemical compatibility and operating temperature range of polycarbonate against the specific environmental conditions of the application before installation. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||