Engineered for superior corrosion resistance and electrical insulation, this 1" polycarbonate U-bolt is ideal for demanding industrial applications. Its robust material ensures long-term performance in harsh environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.44" |
| Inside Length ( B) | 2.15" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 1-inch pipe U-bolt features a robust polycarbonate construction, offering excellent resistance to a wide range of chemicals and environmental factors. With an inside width (A) of 4.44 inches and an inside length (B) of 2.15 inches, it is designed to securely fasten standard 1-inch piping systems. The 1/2"-13 UNC threaded ends provide a reliable and strong connection point. Polycarbonate's non-conductive properties make it an excellent choice for applications where electrical isolation is critical, preventing galvanic corrosion and ensuring safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe sits centrally within the U-bolt's curve. 2. Place the accompanying flat or saddle washer (if applicable) onto the threaded ends of the U-bolt. 3. Thread the nuts onto the U-bolt threads and tighten evenly to secure the pipe against the mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, which can stress the polycarbonate material and lead to premature failure. | Tighten nuts until snug, then apply an additional quarter turn. Avoid excessive force. Torque specifications should be followed if provided. |
| Using the U-bolt with incompatible chemicals that can degrade polycarbonate. | Always verify chemical compatibility charts for polycarbonate before installation in corrosive environments. |
A: This Polycarbonate U-Bolt, 1" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||