Engineered for robust pneumatic systems, this 0.635-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Ideal for enclosures, guards, and custom components.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.635" |
| Length | 23" |
| Width | 15" |
Specified by design engineers worldwide, this 0.635" thick polycarbonate stock sheet is manufactured to exacting tolerances for demanding pneumatic applications. Its superior impact strength, chemical resistance, and excellent optical clarity make it the material of choice for high-pressure enclosures, sight glasses, and protective guards. The 23" length and 15" width provide ample material for fabricating custom manifold blocks, actuator housings, and valve manifolds where reliability and visibility are paramount. Its machinability allows for precise component creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Accurately measure and cut the polycarbonate to the required dimensions using appropriate cutting tools. 3. Secure the cut piece using suitable fasteners or adhesives designed for polycarbonate, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, carbide-tipped blades designed for cutting polycarbonate. Maintain a consistent feed rate and proper blade speed to prevent heat buildup and clean cuts. |
| Over-drilling pilot holes or using excessive force when fastening, causing stress cracks. | Drill pilot holes slightly larger than the screw shank. Use washers to distribute the load and tighten fasteners only until snug to avoid inducing stress. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic Enclosures and Guards, Custom Manifold Fabrication, Sight Glasses and Inspection Windows, Actuator and Valve Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||