Engineered from high-impact polycarbonate, this stock sheet provides robust solutions for suspending and bracing. Its exceptional strength and clarity make it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.584" |
| Length | 26" |
| Width | 28" |
Manufactured under strict quality controls, this 0.584-inch thick polycarbonate stock sheet, measuring 26 inches in length and 28 inches in width, offers superior impact strength, excellent chemical resistance, and high clarity. Its inherent toughness makes it an ideal material for structural bracing, load-bearing supports, and protective shielding in environments subject to vibration or impact. The material's thermal stability ensures performance across a range of operating temperatures, while its light weight facilitates easier handling and installation compared to traditional materials. This sheet meets rigorous industry standards for durability and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely mark the desired location for the sheet, considering all load-bearing requirements. 3. Securely fasten the polycarbonate sheet using appropriate hardware, ensuring even distribution of stress to prevent premature failure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can lead to stress concentration and cracking. | Utilize washers and do not fully tighten fasteners until all are in place, then tighten incrementally and evenly. |
| Using incompatible cleaning agents that can cause surface crazing or degradation. | Clean with mild soap and water or a specialized polycarbonate cleaner. Avoid abrasive solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Industrial bracing and supports, Machine guarding and enclosures, Structural reinforcement components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||