Engineered for extreme environments, this 0.496" thick polycarbonate stock sheet offers exceptional impact strength and optical clarity for critical abrading and polishing processes.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.496" |
| Length | 27" |
| Width | 36" |
Purpose-built for heavy-duty applications, this 0.496" thick polycarbonate stock sheet (27" x 36") delivers superior performance in abrasive and polishing environments. Its inherent toughness and high impact resistance, significantly exceeding that of acrylic, make it ideal for demanding industrial processes where breakage is unacceptable. The material's excellent optical clarity ensures visibility during operation, and its broad chemical resistance provides durability against common industrial solvents and cleaning agents. Operating temperature range and UV resistance further extend its suitability for diverse applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with the intended mounting points or cut lines. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring not to over-tighten which can induce stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ specialized router bits or saw blades with high-tooth counts and appropriate rake angles for clean, chip-free cuts. |
| Over-tightening fasteners, leading to stress cracks. | Utilize oversized holes for fasteners and install with washers to distribute load, allowing for thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding in high-impact industrial settings., Protective shields for grinding and polishing stations., Custom fixtures and jigs for abrasive finishing processes..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||