This 0.664-inch thick polycarbonate stock sheet is engineered for the rigors of industrial pneumatic systems. Offering exceptional impact resistance and clarity, it provides superior protection for critical components.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.664" |
| Length | 29" |
| Width | 33" |
Designed for demanding industrial environments, this 0.664" thick polycarbonate stock sheet (29" x 33") delivers exceptional impact strength and optical clarity. Its high tensile strength and excellent weatherability make it ideal for fabricating protective enclosures, machine guarding, and sight glasses in pneumatic applications. Polycarbonate's inherent toughness significantly reduces the risk of shattering under pressure or impact, ensuring operational continuity and personnel safety in high-stress settings. This material is rated for a broad operating temperature range, making it suitable for diverse environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mounting surfaces, ensuring they are clean and free of debris. 3. Securely fasten the polycarbonate sheet using designated hardware, avoiding overtightening that could induce stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate, leading to chipping or cracking. | Utilize high-speed steel or carbide-tipped blades specifically designed for cutting plastics, ensuring a smooth and clean edge. |
| Over-tightening fasteners, causing stress concentration and potential fracture points in the polycarbonate. | Employ washers and avoid direct metal-to-plastic contact where possible. Tighten fasteners to a snug fit, allowing for slight thermal expansion/contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic enclosure fabrication, Machine guarding and safety shields, Sight glasses for pneumatic systems, Impact-resistant covers for control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||