This premium lubricating polycarbonate stock sheet offers exceptional impact resistance and a low coefficient of friction. Engineered for continuous operation in challenging industrial settings, it minimizes wear and energy consumption.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.334" |
| Length | 27" |
| Width | 42" |
Designed for demanding industrial environments, this 0.334" thick polycarbonate stock sheet (27" x 42") incorporates specialized additives to significantly reduce friction and wear. Its superior impact strength and chemical resistance ensure longevity even under extreme operational stresses. Ideal for components in material handling, conveyor systems, and sliding mechanisms where reduced friction is paramount for operational efficiency and component lifespan. Operating temperature range: -40°C to 120°C. Tensile strength: 60 MPa. Rockwell Hardness: M70-M85.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Cut the polycarbonate sheet to the required dimensions using appropriate tools (e.g., circular saw with a fine-tooth blade). 3. Secure the fabricated part using mechanical fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where low friction is critical. | Select lubricating grade polycarbonate specifically formulated for reduced friction and wear. |
| Over-tightening fasteners, leading to stress cracks. | Use appropriate spacing and torque for fasteners, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction guide rails, Wear strips and pads, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||