This premium polycarbonate stock sheet is engineered for demanding suspending and bracing applications. Its exceptional impact resistance and rigidity ensure long-term structural integrity and safety in critical environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.931" |
| Length | 42" |
| Width | 18" |
Engineered for reliability and performance, this 0.931-inch thick polycarbonate stock sheet offers superior impact strength, outperforming traditional materials in high-stress scenarios. Measuring 42 inches in length and 18 inches in width, its optical clarity and UV resistance make it suitable for both indoor and outdoor applications. The material's inherent toughness minimizes the risk of catastrophic failure, making it an ideal choice for safety-critical bracing and suspending systems where durability and transparency are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Carefully mark and drill pilot holes according to design specifications, using appropriate drill bits for polycarbonate. 3. Securely fasten the polycarbonate sheet using recommended hardware, ensuring even pressure distribution to avoid stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain adequate edge distance for all fasteners as per design guidelines. |
| Over-tightening fasteners, causing stress concentrations and potential delamination. | Use washers and tighten fasteners only until snug, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural bracing for equipment and systems, Protective barriers and guards, Suspension components in industrial settings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||