This 0.144" thick polycarbonate stock sheet provides exceptional strength and clarity for demanding suspending and bracing applications. Its high impact resistance ensures long-term structural integrity and safety in various environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.144" |
| Length | 22" |
| Width | 42" |
Manufactured under strict quality controls, this 0.144" thick polycarbonate stock sheet offers a precise 22" x 42" dimension, ideal for custom fabrication in suspending and bracing systems. The material boasts superior impact strength, exceeding that of glass and acrylic by orders of magnitude, while maintaining excellent optical clarity and UV resistance. Its wide temperature range and resistance to chemical corrosion make it suitable for diverse industrial and commercial installations. The sheet's inherent toughness minimizes the risk of shattering, ensuring enhanced safety and reliability in load-bearing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound to support the intended load. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions for bracing or suspending elements. 3. Securely fasten the polycarbonate sheet using appropriate hardware and mounting techniques, ensuring even distribution of stress and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, causing stress concentration and potential cracking. | Maintain adequate edge distance when drilling holes, typically at least twice the hole diameter, and consider using washers to distribute load. |
| Using incompatible fasteners or adhesives that can degrade the polycarbonate's integrity. | Consult material compatibility charts and use only fasteners or adhesives specifically recommended for polycarbonate to prevent chemical attack or stress cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural bracing for temporary or permanent installations, Support components in suspended ceiling systems, Protective shielding for machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||