This high-impact polycarbonate stock sheet offers exceptional clarity and durability for critical abrading and polishing applications. Its robust material properties ensure longevity under demanding industrial conditions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.897" |
| Length | 44" |
| Width | 30" |
Specified by design engineers worldwide, this 0.897-inch thick polycarbonate stock sheet (44" x 30") is engineered for superior performance. Polycarbonate exhibits an excellent strength-to-weight ratio, high impact resistance (even at low temperatures), and good optical clarity, making it suitable for applications such as precision polishing jigs, abrasion-resistant shielding, and custom tooling in fabrication processes. Its thermal stability allows for machining and fabrication without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers. | Utilize flat washers to distribute stress and prevent damage to the polycarbonate surface. |
| Drilling holes too close to the edge. | Maintain adequate edge distance for drilled holes to prevent stress concentrations and potential cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom Abrasion Shields, Precision Polishing Fixtures, Impact-Resistant Machine Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||