Engineered for demanding applications, this 0.448-inch thick polycarbonate sheet offers superior impact resistance and clarity. Its robust construction makes it suitable for protective barriers and custom fabrication in industrial settings.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.448" |
| Length | 41" |
| Width | 22" |
Specified by design engineers worldwide, this premium polycarbonate stock sheet boasts exceptional impact strength, second only to reinforced carbon fiber. With a substantial 0.448-inch thickness, 41-inch length, and 22-inch width, it provides a formidable barrier against physical forces and environmental factors. Its high tensile strength and rigidity make it ideal for applications requiring durability and transparency, such as machine guarding, safety shields, and architectural glazing in high-traffic or hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean, flat cutting surface and appropriate cutting tools designed for polycarbonate. 2. Measure and mark precise cut lines, accounting for material expansion/contraction if necessary. 3. Securely clamp the sheet to prevent movement during cutting, and use a slow, steady feed rate with a fine-tooth blade to minimize chipping and stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for plastics. | Utilize specialized blades designed for polycarbonate to achieve clean, chip-free cuts and prevent premature blade wear. |
| Drilling holes too close to the edge without relief cuts. | Incorporate small relief cuts at the corners of drilled holes to prevent stress cracking and propagation of fractures. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields, Industrial Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||