High-performance polycarbonate stock sheet, engineered for demanding suspending and bracing applications. Offers exceptional impact resistance and clarity, ensuring reliable structural integrity in industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 35" |
| Width | 46" |
Specified by design engineers worldwide, this 0.356-inch thick polycarbonate stock sheet measures 35 inches in length and 46 inches in width. Its superior impact strength, exceeding that of glass and acrylic by a significant margin, makes it ideal for load-bearing and protective bracing. The material exhibits excellent UV resistance and a wide operating temperature range, ensuring longevity in diverse environmental conditions. Its inherent flame retardancy further enhances safety in critical infrastructure and industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Carefully position the polycarbonate sheet, aligning mounting holes with pre-drilled locations. 3. Secure the sheet using appropriate fasteners, such as bolts or rivets, ensuring even pressure distribution to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners | Use washers and tighten fasteners only until snug to avoid cracking or deforming the polycarbonate. |
| Using incompatible cleaning agents | Clean with mild soap and water or a specialized polycarbonate cleaner. Avoid abrasive chemicals or solvents that can damage the surface. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and enclosures, Industrial bracing and structural support, Protective shields for equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||