This premium polycarbonate stock sheet offers exceptional impact resistance and optical clarity. Ideal for protective barriers, specialized fixtures, and high-wear surfaces in abrading and polishing environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.145" |
| Length | 33" |
| Width | 43" |
Manufactured under strict quality controls, this 0.145-inch thick polycarbonate sheet provides superior durability and impact strength, rated at 100 J/m for Charpy impact. Its excellent optical clarity (90% light transmission) ensures visibility in critical applications. The material exhibits a high tensile strength of 65 MPa and a flexural modulus of 2.4 GPa, making it suitable for fabrication into custom guards, jigs, and fixtures requiring robust performance against abrasion and impact. Standard sheet dimensions are 33 inches in width by 43 inches in length.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for mounting is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, verifying alignment with any pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring they are snug but not overtightened to avoid stress cracking. Consider using washers for uniform pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without a pilot hole or appropriate speed for polycarbonate, leading to chipping or cracking. | Employ a sharp, high-speed steel drill bit designed for plastics, or use a pilot hole and a slow, steady feed rate. Chamfering the entry hole is also recommended. |
| Excessive tightening of fasteners, causing localized stress concentrations and potential delamination or fracture. | Tighten fasteners until snug. For larger sheets or areas with significant vibration, use oversized holes with neoprene or rubber washers to absorb shock and prevent over-tightening. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guarding in industrial settings, Custom jigs and fixtures for polishing operations, Abrasion-resistant sight glasses and inspection panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||