This 0.297-inch thick, 38-inch by 30-inch polycarbonate stock sheet is engineered for demanding pneumatic applications. Its superior impact strength and clarity make it ideal for enclosures and safety components.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.297" |
| Length | 38" |
| Width | 30" |
Specified by design engineers worldwide, this 0.297" thick polycarbonate stock sheet offers exceptional impact resistance, exceeding that of glass and acrylic. Its inherent toughness makes it the material of choice for critical pneumatic system enclosures, machine guarding, and protective covers where durability and visibility are paramount. The material exhibits excellent dimensional stability under varying environmental conditions and provides superior clarity for visual monitoring of internal components. Its machinability allows for precise fabrication of custom pneumatic housing and fittings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully align the polycarbonate sheet with the mounting points, avoiding excessive stress. 3. Secure the sheet using appropriate fasteners, ensuring uniform pressure distribution to prevent warping or cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners leading to stress cracks. | Use washers and avoid direct metal-to-plastic contact; tighten fasteners incrementally and evenly. |
| Using incompatible cleaning agents that can cause surface degradation. | Clean with mild soap and water or specialized polycarbonate cleaners only. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic System Enclosures, Machine Guarding, Sight Glasses for Pneumatic Components, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||