This robust Polycarbonate stock sheet, engineered for abrasive and polishing tasks, delivers exceptional impact resistance and optical clarity. Its substantial 0.990" thickness ensures longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.990" |
| Length | 20" |
| Width | 28" |
Manufactured under strict quality controls, this 0.990-inch thick Polycarbonate stock sheet measures 20 inches by 28 inches. Polycarbonate offers a superior combination of impact strength (exceeding 100 ft-lbs/in Izod), excellent optical clarity (90% light transmission), and good chemical resistance, making it ideal for high-wear surfaces and protective barriers in abrading and polishing operations. Its dimensional stability ensures consistent performance under varied environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean, dry, and free of debris. 2. Accurately measure and mark the desired cut lines on the Polycarbonate sheet. 3. Utilize appropriate cutting tools (e.g., fine-tooth saw, laser cutter) for precise fabrication, ensuring proper support to prevent cracking. 4. Smooth all cut edges with fine-grit sandpaper or a deburring tool to remove any sharp edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that can cause chipping or stress fractures. | Employ specialized cutting blades for plastics, such as those designed for acrylic or polycarbonate, and maintain a consistent, moderate feed rate. |
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use oversized holes for fasteners and install with appropriate washers, allowing for thermal expansion and contraction of the material. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for abrasive equipment, Polishing fixture components, Protective shielding in high-impact environments, Wear surfaces for material handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||