This robust polycarbonate stock sheet offers exceptional impact resistance and optical clarity. Precision-cut to 0.968" thickness, 23" length, and 22" width, it's engineered for demanding industrial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.968" |
| Length | 23" |
| Width | 22" |
Precision-manufactured to tight tolerances, this 0.968" thick polycarbonate sheet (23" x 22") provides superior impact strength, chemical resistance, and UV stability. Its inherent toughness makes it an excellent choice for demanding environments, offering a lightweight yet durable alternative to glass. Applications range from protective machine guarding and industrial glazing to custom fabrication and optical components requiring high performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Carefully position the polycarbonate sheet according to design requirements. 3. Secure the sheet using appropriate fastening methods, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to stress cracks. | Maintain adequate edge distance for all drilled holes, typically at least 2x the hole diameter. |
| Using incompatible cleaning agents that can damage the polycarbonate surface. | Utilize mild soap and water or approved polycarbonate cleaners; avoid abrasive solvents and ammonia-based products. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Industrial Glazing, Protective Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||