This industrial-grade Polycarbonate stock sheet offers exceptional impact resistance and clarity. Its robust nature makes it ideal for protective barriers, machine guarding, and custom fabrication in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.966" |
| Length | 25" |
| Width | 29" |
Manufactured under strict quality controls, this 0.966-inch thick Polycarbonate stock sheet measures 25 inches in length and 29 inches in width. Polycarbonate is renowned for its superior impact strength, exceeding that of glass and acrylic, while maintaining excellent optical clarity. It exhibits a wide service temperature range and good UV resistance, making it suitable for both indoor and outdoor applications. Its inherent toughness provides superior protection against impacts, abrasions, and chemical exposure, ensuring longevity in harsh industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Carefully measure and cut the polycarbonate sheet to the required dimensions using appropriate tools. 3. Secure the sheet using pre-drilled holes and corrosion-resistant fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to chipping or melting. | Employ specialized polycarbonate cutting blades and bits, ensuring proper speed and feed rates. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use washers and allow for slight expansion by not fully seating fasteners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Custom Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||