This lubricating grade polycarbonate stock sheet offers exceptional impact strength and a low coefficient of friction. Its robust mechanical properties make it ideal for applications requiring reduced wear and reliable performance under stress.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.937" |
| Length | 34" |
| Width | 21" |
Built to exacting engineering tolerances, this 0.937-inch thick polycarbonate stock sheet measures 34 inches in length and 21 inches in width. Formulated for superior lubricity, it exhibits excellent wear resistance, high tensile strength, and a broad operating temperature range. Its inherent toughness and dimensional stability ensure consistent performance in demanding environments, making it suitable for components in conveying systems, bearings, and sliding mechanisms where reduced friction and prolonged service life are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully align the polycarbonate sheet with the pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and tighten fasteners incrementally to achieve a snug fit without deformation. |
| Using incompatible cleaning agents that can damage the polycarbonate surface. | Employ mild soap and water or a dedicated polycarbonate cleaner; avoid abrasive materials or harsh solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Conveyor system components, Self-lubricating bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||