This robust 0.894-inch thick polycarbonate stock sheet offers exceptional impact strength and a proprietary lubricating additive. It's designed for applications demanding reduced friction and superior wear characteristics.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.894" |
| Length | 39" |
| Width | 47" |
Trusted by engineers across multiple sectors, this premium polycarbonate sheet is manufactured to exacting standards, measuring 0.894 inches in thickness, 39 inches in length, and 47 inches in width. Its inherent high impact resistance is enhanced by a specialized internal lubricant, significantly reducing friction and wear in dynamic applications. This material is ideal for components in high-cycle machinery, sliding mechanisms, and areas where continuous contact and abrasion are prevalent, ensuring extended service life and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting holes or adhesive application areas. 3. Secure the sheet using appropriate fasteners or industrial-grade adhesives, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and do not overtighten fasteners. Allow for thermal expansion if applicable. |
| Using incompatible cleaning agents, causing surface damage. | Employ only mild soap and water or approved polycarbonate cleaners. Avoid abrasive materials and solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction conveyor components, Wear strips and guides in automated machinery, Protective covers for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||