This high-impact Polycarbonate stock sheet, precisely manufactured at 0.881" thickness, is engineered for robust performance in demanding pneumatic systems and protective enclosures.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.881" |
| Length | 26" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.881-inch thick Polycarbonate sheet offers superior impact resistance and clarity. Its dimensions of 26 inches by 27 inches provide ample material for fabrication of custom pneumatic enclosures, machine guards, and sight glasses. The inherent strength and chemical resistance of polycarbonate make it ideal for environments exposed to moderate pressures and a wide range of industrial fluids, ensuring long-term reliability and operational safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Carefully position the Polycarbonate sheet, aligning any pre-drilled holes or cutouts. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution and avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and tighten fasteners incrementally and evenly across the sheet. |
| Using abrasive cleaning agents that can scratch the Polycarbonate surface. | Clean with a mild soap and water solution and a soft cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic system enclosures, Machine guarding, Sight glasses for fluid level monitoring.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||