This 0.876-inch thick polycarbonate stock sheet offers superior impact resistance and clarity. Engineered for demanding safety applications, it provides a robust barrier against projectiles and hazards.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.876" |
| Length | 15" |
| Width | 23" |
Specified by design engineers worldwide, this 0.876" thick polycarbonate sheet (15"x23") delivers exceptional strength and impact toughness, exceeding industry standards for safety glazing. Its high tensile strength, low creep, and excellent optical clarity make it ideal for demanding environments. This material exhibits a broad service temperature range and superior abrasion resistance when coated, ensuring long-term performance in machine guarding, protective shields, and industrial enclosures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the polycarbonate sheet securely within the designated frame or mounting area. 3. Employ appropriate fastening methods (e.g., screws with large washers, clamping systems) to distribute stress evenly and prevent cracking. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to edges, leading to stress concentration and potential cracking. | Maintain a minimum edge distance of at least twice the hole diameter when drilling. |
| Using solvents that are incompatible with polycarbonate, causing crazing or degradation. | Consult the material data sheet for approved cleaning agents and adhesives. Avoid aggressive solvents like ketones and chlorinated hydrocarbons. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields and Barriers, Industrial Glazing and Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||