This robust 0.832-inch thick polycarbonate stock sheet, measuring 36"x46", is engineered for demanding abrading and polishing applications. Its superior impact resistance and clarity make it an indispensable material for industrial use.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.832" |
| Length | 36" |
| Width | 46" |
Engineered for reliability and performance, this 0.832" thick polycarbonate stock sheet offers exceptional impact strength and optical clarity. Measuring 36" in length and 46" in width, it's manufactured from high-grade polycarbonate resin, known for its excellent abrasion resistance and dimensional stability under varying environmental conditions. This material is ideal for fabricating protective guards, sight glasses, and custom fixtures used in high-wear, abrasive environments. Its shatterproof nature significantly enhances workplace safety, while its smooth surface minimizes friction and adhesion during polishing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Carefully align the polycarbonate sheet with the designated mounting points. 3. Secure the sheet using appropriate fasteners (e.g., screws, bolts) with washers to distribute pressure evenly, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ specialized carbide-tipped blades and appropriate feed rates for a clean, burr-free cut. |
| Drilling holes too close to the edge without proper support. | Maintain adequate edge distance for drilled holes and consider using backing material during drilling to prevent cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guarding, Abrasion-resistant sight windows, Custom fixtures for polishing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||