This robust polycarbonate stock sheet is engineered for superior impact resistance and clarity. Its substantial thickness makes it ideal for demanding industrial environments requiring protection against abrasion and harsh conditions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.832" |
| Length | 41" |
| Width | 26" |
Purpose-built for heavy-duty applications, this 0.832-inch thick polycarbonate stock sheet offers exceptional impact strength and durability. With dimensions of 41 inches by 26 inches, it provides ample coverage for various industrial fabrication needs. Polycarbonate's inherent UV resistance and wide operating temperature range ensure consistent performance in challenging environments. This material is favored for its shatter resistance, exceeding that of acrylic and glass, making it suitable for protective glazing, machine guarding, and robust structural components in abrading and polishing operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate for secure mounting, ensuring a clean and level surface. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate cutting tools designed for plastics. 3. Fasten the sheet using pre-drilled holes and suitable hardware, employing washers to distribute stress and prevent cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits not designed for plastics, leading to chipping or cracking. | Employ specialized plastic drill bits or a sharp twist drill with a reduced point angle and slow speed for clean drilling. |
| Over-tightening fasteners, causing stress concentrations and potential delamination or cracking. | Tighten fasteners until snug, then back off a quarter turn. Use appropriate washers to spread the load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for abrasive processes, Impact-resistant protective shields, Durable work surfaces in polishing applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||