This 0.781" thick polycarbonate stock sheet offers exceptional durability and inherent lubricity. Engineered for demanding environments, it provides superior wear resistance and low friction in critical components.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 20" |
| Width | 32" |
Purpose-built for heavy-duty applications, this polycarbonate stock sheet boasts a substantial 0.781" thickness, ensuring robust structural integrity. Its inherent lubricating properties, derived from its advanced polymer composition, significantly reduce friction and wear in moving parts, extending operational life. With dimensions of 20" x 32", this sheet is ideal for fabricating custom components, wear pads, and slide surfaces in machinery, material handling systems, and other high-stress industrial settings where traditional lubricants may fail or contaminate the environment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired cut lines on the polycarbonate sheet using a non-abrasive marker. 2. Utilize a fine-tooth saw blade designed for plastics to make clean, precise cuts, ensuring minimal heat buildup. 3. Deburr all cut edges smoothly to prevent stress concentrations and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade with too few teeth or a coarse pitch, leading to chipping and rough edges. | Employ a saw blade with a high tooth count (e.g., 60-80 TPI) and a negative hook angle for a cleaner cut. |
| Applying excessive force during cutting, causing the sheet to flex and potentially crack. | Allow the saw to do the work; maintain a steady, controlled feed rate without forcing the blade. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Wear Strips and Bushings, Guide Rails for Conveyor Systems, Low-Friction Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||