This high-performance polycarbonate stock sheet offers superior impact resistance and excellent wear properties. Its inherent lubricity makes it suitable for applications where friction reduction is critical.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.749" |
| Length | 44" |
| Width | 17" |
A high-performance industrial component, this 0.749-inch thick polycarbonate sheet (44 inches in length, 17 inches in width) is engineered for demanding environments. Its exceptional impact strength, combined with a naturally low coefficient of friction, minimizes wear and extends component life in dynamic systems. This material exhibits excellent chemical resistance and maintains structural integrity across a wide temperature range, making it a reliable choice for friction-critical applications and wear surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet to the substrate, ensuring uniform pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate, leading to chipping or cracking. | Employ specialized polycarbonate cutting blades or saws with fine teeth and appropriate cooling to prevent thermal stress and material damage. |
| Over-tightening fasteners, causing stress concentration and potential delamination or cracking of the polycarbonate sheet. | Utilize washers and apply fasteners with moderate torque, ensuring even distribution of load and allowing for slight thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding surfaces, Wear strips and guides, Protective shielding in high-impact areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||